Loading... Please wait...
USA
- Home
- Skateboard Building
- Deck Kits
- Pro Kits
- SK8Makers City Cruiser Pro-Foam Collab Kit
SK8Makers City Cruiser Pro-Foam Collab Kit
Product Description:
“The SK8Makers City Cruiser is a fun-to-ride skateboard designed for getting around town, especially for beginners who are just learning to ride a skateboard or old-timers like me who aren't in it for the tricks. For these reasons it's become the most popular board shape students produce in my DIY skateboard workshops.”
Matt Berger of SK8Makers is the author of "The Handmade Skateboard", a timeless guide to designing and building your own custom longboard, cruiser, or street skateboard from scratch. Through his book and workshops, Matt has inspired countless builders to make their own handmade boards. Since the first SK8Makers workshop in Los Angeles, CA in 2013, Matt has graduated hundreds of students with a diploma in the form of a custom skateboard.
SK8Makers City Cruiser Pro-Foam Collab Kit
Calculated at checkout
SK8Makers City Cruiser Pro-Foam Collab Kit
- Two 7-layer sets of maple 9.5 x 31 x 1/16” veneer
- Select the thickness for your Cross band thickness, 1/16" or the thinner 1/24"
- One 3-dimensionally shaped 9.5 x 31 x 2” foam mold designed by SK8Makers
- Printable PDF full-scale paper template (digital download)
Thin Air Press Kit
- 20 x 70” heavy duty vinyl vacuum bag with one-way valve attached
- manual vacuum Super Pump
- breather netting
- extra sealing tape
These kits are designed for builders with experience using the Roarockit vacuum-laminating method. Instructions do not come with these kits. For in-depth tutorials view the photo and video tutorials.
To make your mold last longer, completely cover it with strips of wide (plastic) packing tape.
The foam mold and Thin Air Press Bag, pump, and breather netting are designed to be used for many, many builds.
Keep all your reusable kit parts in good working order by following the maintenance tips included with the kit.
Using uncut sheets of veneer, plywood backer boards and external clamps can puncture a Thin Air Press bag. Treat your TAP bag with care, inspect regularly for holes.
Q: What else do I need to make a board with this kit?
A: Glue and a roller, possibly an off-cut sheet of plywood to act as a stiffener under the mold, and a jigsaw (or bandsaw) to trim out the pressed board
Related Products
-
Stainless Steel RockitRuler $99.95 -
Rockit SawKit $47.95 -
